Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 1019 / 1058

90. Weighted Random Early Detection (WRED) Commands
1020
90.3. config wred profile
 Description
This command is used to configure the WRED profile.
 Format
config wred profile [default | profile_id <int 2-128> | <profile_name 32>] {tcp | non_tcp}
{green | yellow | red} min_threshold <int 0-100> max_threshold <int 0-100> max_drop_rate
<int 0-100>

Parameters
Zxxx0:admin# config wred ports 1:1 cos 2 profile profile_id 2
Command: config wred ports 1 cos 2 profile profile_id 2
Success.
Zxxx0:admin#
default Specify the default WRED profile to be configured.
profile_id
Specify the WRED profile ID to be configured.
<int 2-128>
Enter the WRED profile ID.
<profile_name 32>
Enter the WRED profile name.
tcp (Optional) Specify the TCP type of packets to be dropped.
non_tcp (Optional) Specify the non-TCP type of packets to be dropped.
green (Optional) Specify the green packets to be dropped.
yellow (Optional) Specify the yellow packets to be dropped.
red (Optional) Specify the red packets to be dropped.
min_threshold
Specify the minimum threshold value used. If the queue size is higher than this value,
then the color yellow will be assigned to it. If the queue size is lower than this value, then
the color green will be assigned to it and then it will be guaranteed not to be dropped.
Yellow packet behavior depends on the profile setting for this color.
<int 0-100>
Enter the value between 0 and 100.
max_threshold
Specify the maximum threshold value used. If the queue size is lower than this value, then
the color yellow will be assigned to it. If the queue size is higher than this value, then the
color red will be assigned to it and then it will be dropped. Yellow packet behavior
depends on the profile setting for this color.
<int 0-100>
Enter the value between 0 and 100.