Panasonic ZEQUO 6400 Скачать руководство пользователя страница 292

Страница: 292 / 1058

23. DHCP Server Commands

293

23.7. config dhcp pool domain_name



Description

This command is used to specify the domain name for the client if the server allocates the

address for the client from this pool. The domain name configured here will be used as the

default domain name by the client. By default, the domain name is empty. If the domain

name is empty, the domain name information will not be provided to the client.



Format

config dhcp pool domain_name <pool_name 12> {<domain_name 64>}



Parameters



Restrictions

Only Administrator, Operator and Power-User level users can issue this command.



Example

To configure the domain name option of the DHCP pool:

23.8. config dhcp pool dns_server



Description

This command is used to specify the IP address of a DNS server that is available to a DHCP

client. Up to three IP addresses can be specified on one command line. If DNS server is not

specified, the DNS server information will not be provided to the client. If this command is

input twice for the same pool, the second command will overwrite the first command.



Format

config dhcp pool dns_server <pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}

<pool_name 12>

Specify the DHCP pool name.

<domain_name 64>

(Optional) Specify the domain name of the client.

Zxxx0:admin#config dhcp pool domain_name nyknicks nba.com
Command: config dhcp pool domain_name nyknicks nba.com

Success.

Zxxx0:admin#

Содержание ZEQUO 6400



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZEQUO 6400

Отзывы:

Похожие инструкции для ZEQUO 6400

Бренды по названию

Популярные бренды

Panasonic ZEQUO 6400, Руководство по эксплуатации

Результаты поиска

Содержание ZEQUO 6400

Отзывы:

Похожие инструкции для ZEQUO 6400

Бренды по названию

Популярные бренды