Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 222 / 1058

20. Debug Software Command List
223
To clear the debug buffer:
To upload the messages stored in debug buffer to TFTP server:
20.3. debug output

Description
Use the command to set a specified module's debug message output to debug buffer or
local console. If the user uses the command in a Telnet session, the error message also is
output to the local console.
When selecting to output to the debug buffer and there are debug messages
being outputted, the system memory pool will be used as the debug buffer.
The functions which will use the system memory pool resource may fail to
execute command such as download and upload firmware, or save
configuration. If you want to execute these commands successfully, please
use the command "debug buffer clear" to release the system's memory pool
resources manually first.

Format
debug output [module <module_list> | all] [buffer | console]

Parameters
Zxxx0:admin# debug buffer clear
Command: debug buffer clear
Success.
Zxxx0:admin#
Zxxx0:admin# debug buffer upload_toTFTP 10.0.0.90 debugcontent.txt
Command: debug buffer upload_toTFTP 10.0.0.90 debugcontent.txt
Connecting to server................... Done.
Upload configuration................... Done.
Zxxx0:admin#
module Specifies the module list.
<module_list>
Enter the module list here.
all Control output method of all modules.
buffer Direct the debug message of the module output to debug buffer(default).
console Direct the debug message of the module output to local console.
ワヰヵユ ワヰヵユ