27. Distance Vector Multicast Routing Protocol (DVMRP) Commands
338
27.1. config dvmrp
Description
This command is used to configure DVMRP configurations.
Format
config dvmrp [ipif <ipif_name 12> | all] {metric <value 1-31> | probe <sec 1-65535> |
neighbor_timeout <sec 1-65535> | state [enable | disable]}
Parameters
config dvmrp [ipif <ipif_name 12> | all] {metric <value 1-31> | probe <sec 1-65535> |
neighbor_timeout <sec 1-65535> | state [enable | disable]}
enable dvmrp
disable dvmrp
show dvmrp {ipif <ipif_name 12>}
show dvmrp neighbor {ipif <ipif_name 12> | ipaddress <network_address>}
show dvmrp nexthop {ipaddress <network_address> | ipif <ipif_name 12>}
show dvmrp routing_table {ipaddress <network_address>}
ipif
Specifies the IP interface name used.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
all
Specifies that all the IP interfaces will be used.
metric
(Optional) Allows the assignment of a DVMRP route cost to the above IP interface. A
DVMRP route cost is a relative number that represents the real cost of using this route in
the construction of a multicast delivery tree. It is similar to, but not defined as, the hop
count in RIP.
<value 1-31>
Enter the metric value used here. This value must be between 1 and 31. The default
value is 1.
probe
(Optional) Specifies the time in seconds between the DVMRP Probe message
transmissions.
<sec 1-65535>
Enter the probe value used here. This value must be between 1 and 65535
seconds. The default value is 10 seconds.
neighbor_timeout
(Optional) Specifies the time period for DVMRP will hold Neithbor Router reports before
issuing poison route messages.
<sec 1-65535>
Enter the neighbor timeout value used here. This value must be between 1 and
65535 seconds. The default value is 35 seconds.
state
(Optional) Specifies the DVMRP state of the IP interface.
enable
Specifies that DVMRP of the specified IP interface will be enabled.
disable
Specifies that DVMRP of the specified IP interface will be disabled.
Содержание ZEQUO 6400
