Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 616 / 1058

57. Network Management Commands
617
57.16. config snmp linkchange_traps ports
 Description
This command is used to configure the sending of linkchange traps and per port control for
sending of change traps.
 Format
config snmp linkchange_traps ports [all | <portlist>] [enable | disable]

Parameters

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
To enable SNMP linkchange traps for ports 1 to 4:
57.17. show snmp traps

Description
This command is used to display the SNMP trap state.

Format
show snmp traps {linkchange_traps {ports <portlist>}}
 Parameters
all Specify all ports.
<portlist>Specify a port or range of ports.
enable Enable sending of the link change trap for this port.
disable Disable sending of the link change trap for this port.
Zxxx0:admin#config snmp linkchange_traps ports 1-4 enable
Command: config snmp linkchange_traps ports 1-4 enable
Success.
Zxxx0:admin#
linkchange_traps
(Optional) Specify to display the status of linkchange traps.