28. Domain Name System (DNS) Relay Commands
347
To add the entry "dns1" with IP address 10.24.22.5 to the DNS static table:
To delete the entry "dns1" with IP address 10.24.22.5 from the DNS static table:
28.2. enable dnsr
Description
This command is used to enable DNS relay.
Format
enable dnsr {[cache | static]}
Parameters
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable DNS relay:
Zxxx0:admin#config dnsr add static dns1 10.24.22.5
Command: config dnsr add static dns1 10.24.22.5
Success.
Zxxx0:admin#
Zxxx0:admin#config dnsr delete static dns1 10.24.22.5
Command: config dnsr delete static dns1 10.24.22.5
Success.
Zxxx0:admin#
cache
Specify to enable the cache lookup for the DNS relay on the Switching Hub.
static
Specify to enable the static table lookup for the DNS relay on the Switching Hub.
Zxxx0:admin#enable dnsr
Command: enable dnsr
Success.
Zxxx0:admin#
Содержание ZEQUO 6400
