Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 768 / 1058

67. Precision Time Protocol (PTP) Commands
769
To configure the domain number of the PTP clock as 1 and assign a domain name of
internal_domain for the unit 1, when the stacking mode is enabled.
67.6. config ptp boundary

Description
This command is used to configure the PTP boundary clock attributes and requires at
least one parameter to execute.

Format
config ptp boundary {priority1 <value 0-255> | priority2 <value 0-255>}(1)

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure the priority1 value of the boundary clock as 127:
Zxxx0:admin#config ptp clock domain_number 1 unit 1 domain_name internal_domain
Command: config ptp clock domain_number 1 unit 1 domain_name internal_domain
Success.
Zxxx0:admin#
priority1 (Optional) Specifies that the priority 1 attribute is used in the execution of the best master
clock algorithm. Lower values take precedence.
<value 0-255>
Enter the priority 1 value used here. This value must be between 0 and 255.
priority2 (Optional) Specifies that the priority 2 attribute is used in the execution of the best master
clock algorithm. Lower values take precedence. In the event that the operation of the
BMC algorithm fails to order the clocks based on the values of priority1, the clock's class,
and the clock's accuracy; the priority2 attribute will allow the creation of lower values
compared to the other devices.
<value 0-255>
Enter the priority 2 value used here. This value must be between 0 and 255.
Zxxx0:admin# config ptp boundary priority1 127
Command: config ptp boundary priority1 127
Success.
Zxxx0:admin#