Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 486 / 1058

44. Limited Multicast IP Address Commands
487

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To add multicast address profile 2 to ports 1 and 3:
44.7. show limited_multicast_addr

Description
This command is used to display a multicast address range by ports or by VLANs.
When the function is configured on a port or VLAN, it limits the multicast group
operated by the IGMP/MLD snooping function and layer 3 function. If the IPv4 or
IPv6 option is not specified, IPv4 is implied.

Format
show limited_multicast_addr [ ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
 Parameters
profile_name(Optional) Specify a profile name to be added to or deleted from the port or VLAN.
<name 32>
The profile name can be up to 32 characters long.
access (Optional) Specify whether the access is permit or deny.
permit
Specify that the packets that match the addresses defined in the profiles will be
permitted.
deny Specify that the packets that match the addresses defined in the profiles will be
denied.
Zxxx0:admin#config limited_multicast_addr ports 1,3 add profile_id 2
Command: config limited_multicast_addr ports 1,3 add profile_id 2
Success.
Zxxx0:admin#
ports Specify a range of ports to show the limited multicast address configuration.
<portlist>
Specify a range of ports to be displayed.
vlanid Specify the VLAN ID of VLANs that require information displaying about the multicast
address filtering function.
<vlanid_list>
Enter the VLAN ID of the VLAN here.
ipv4 (Optional) Specify to display the IPv4 multicast profile associated with the port or VLAN.
ipv6 (Optional) Specify to display the IPv6 multicast profile associated with the port or VLAN.