Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 649 / 1058

59. Open Shortest Path First (OSPF) Command List
650

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To create OSPF area aggregation settings:
59.3. config ospf aggregation

Description
This command is used to configure the OSPF area aggregation settings.
 Format
config ospf aggregation <area_id> <network_address> lsdb_type [summary {advertise
[enable | disable]} | nssa_ext {advertise [enable | disable]}]

Parameters
Zxxx0:admin# create ospf aggregation 10.1.1.1 192.168.0.0/16 lsdb_type summary
Command: create ospf aggresgation 10.1.1.1 192.168.0.0/16 lsdb_type summary
Success.
Zxxx0:admin#
<area_id>
A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the
OSPF area in the OSPF domain.
<network_address>
The IP address that uniquely identifies the network that corresponds to the OSPF Area.
The network address format is 'IP address/prefix length'.
lsdb_type
Specifies the Link-State Database (LSDB) type of address aggregation.
summary
Specifies the LSDB type as summary.
advertise
(Optional) Allows for the advertisement of the summary LSDB.
enable
Specifies that the advertisement trigger will be enabled.
disable
Specifies that the advertisement trigger will be disabled.
nssa_ext
Specifies the the LSDB type as a Not-So-Stub Area External Route (NSSA EXT).
advertise
(Optional) Allows for the advertisement of aggregated NSSA external route.
enable
Specifies that the advertisement trigger will be enabled.
disable
Specifies that the advertisement trigger will be disabled.