Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 801 / 1058

69. QoS Commands
802
69.9. config 802.1p user_priority

Description
This command is used to configure the way by which the Switching Hub will map an
incoming packet, based on its 802.1p user priority, to one of the eight available
hardware priority queues on the Switching Hub. The Switching Hub's default is to
map the following incoming 802.1p user priority values to the eight hardware priority
queues. The suggested mapping is shown in the following table. Users can change
this mapping by specifying the 802.1p user priority to assign to the <class_id>.
Priority in Frames Priority Queue of ASIC Remark
0 2 Mid-Low
1 0 Lowest
2 1 Lowest
3 3 Mid-Low
4 4 Mid-High
5 5 Mid-High
6 6 Highest
7 7 Highest

Format
config 802.1p user_priority {ports [<portlist> | all]} <priority 0-7> <class_id 0-7>
Zxxx0:admin#show scheduling_mechanism 1-10
Command: show scheduling_mechanism 1-10
Port Mode
----- ------
1 Strict
2 Strict
3 Strict
4 Strict
5 Strict
6 Strict
7 Strict
8 Strict
9 Strict
10 Strict
Zxxx0:admin#