Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 494 / 1058

45. Link Aggregation Commands
495
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the link aggregation algorithm to mac-source-dest:
45.5. show link_aggregation

Description
This command is used to display the current link aggregation configuration of the
Switching Hub.

Format
show link_aggregation {group_id <value 1-48> | algorithm}

Parameters
If no parameter is specified, the system will display all the link
aggregation information.

Restrictions
None.
l4_src_port
Indicate that the Switching Hub should examine the Layer 4 source port.
l4_dest_port
Indicate that the Switching Hub should examine the Layer 4 destination port.
l4_src_dest_port
Indicate that the Switching Hub should examine the Layer 4 source and destination port.
Zxxx0:admin#config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
Zxxx0:admin#
group_id(Optional) Specify the group ID. The group number identifies each of the groups.
<value 1-48>
The Switching Hub allows up to 48 link aggregation groups to be configured.
algorithm
(Optional) Specify the display of link aggregation by the algorithm in use by that group.
ワヰヵユ ワヰヵユ