62. Protocol Independent Multicast (PIM) Commands
706
Example
To disable PIM:
62.4. show pim neighbor
Description
This command is used to display the current PIM neighbor router table.
Format
show pim neighbor {ipif <ipif_name 12> | ipaddress <network_address>}
Parameters
Restrictions
None.
Example
To display PIM neighbor address table:
Zxxx0:admin# disable pim
Command: disable pim
Success.
Zxxx0:admin#
ipif
(Optional) Specifies the name of the IP interface for which you want to display the
current PIM neighbor router table.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
ipaddress
(Optional) Specifies the IP address and netmask of the destination.
<network_address>
Enter the destination IP address used here.
If no parameter is specified, the system will display all the PIM neighbor addresses in the table.
Содержание ZEQUO 6400
