Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 758 / 1058

65. Port Security Commands
759

Example
To display the global configuration of port security:
To display the port security information of Switching Hub ports 1 to 6:
65.8. enable port_security trap_log

Description
This command is used to enable port security traps/logs. When this command is
enabled, if there's a new MAC that violates the pre-defined port security
configuration, a trap will be sent out with the MAC and port information and the
relevant information will be logged.

Format
enable port_security trap_log
 Parameters
None.
Zxxx0:admin# show port_security
Command: show port_security
Port Security Trap/Log : Disabled
System Maximum Address : 512
VLAN Configuration (Only VLANs with limitation are displayed)
VID VLAN Name Max. Learning Addr.
---- -------------------------------- -------------------
1 default 64
2 TstVLAN 8
Zxxx0:admin#
Zxxx0:admin#show port_security ports 1-6
Command: show port_security ports 1-6
Port State Lock Address Mode Max. Learning Addr.
----- ------- ------------------ -----------------
1 Disabled DeleteOnReset 32
2 Disabled DeleteOnReset 32
3 Disabled DeleteOnReset 32
4 Disabled DeleteOnReset 32
5 Disabled DeleteOnReset 32
6 Disabled DeleteOnReset 32
Zxxx0:admin#