Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 682 / 1058

60. OSPFv3 Commands
683

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure an OSPFv3 area aggregation:
60.12. show ospfv3 aggregation

Description
This command is used to display OSPFv3 area aggregation configurations.
 Format
show ospfv3 aggregation {<area_id>}

Parameters

Restrictions
None.

Example
To display OSPFv3 area aggregations:
advertiseSpecifies whether the OSPFv3 ABR will use this aggregation to aggregate the intra-area
routes or not.
enable
Specifies that the OSPFv3 ABR will use this aggregation to aggregate the intra-area
routes when it advertises these routes to another area.
disable
Specifies that the OSPFv3 ABR will not use this aggregation to aggregate the intra-
area routes when it advertises these routes to another area.
Zxxx0:admin# config ospfv3 aggregation 2.2.2.2 2000::/16 advertise disable
Command: config ospfv3 aggregation 2.2.2.2 2000::/16 advertise disable
Success.
Zxxx0:admin#
<area_id>(Optional) Specifies the OSPFv3 area's ID. It is a 32-bit number in the form of an IPv4
address that uniquely identifies the OSPFv3 area in the OSPFv3 domain.