Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 886 / 1058

76. Stacking Commands
887
Figure 76-2 Stacking configuration
76.1. config stacking_mode

Description
This command configures the state of stacking function. By default stacking mode is
disabled. Administrators need to specifically configure the stacking mode to make the
Switching Hub stackable. Stacking mode can be changed under standalone mode
only!

Format
config stacking_mode [disable | enable]

Parameters
 Restrictions
Only Administrator-level users can issue this command.

Example
To enable stacking mode:
The device will be rebooted immediately without the confirmation after
executing this command, so please save the configuration first.
config stacking_mode [disable | enable]
config stacking force_master_role state [enable | disable]
show stacking_mode
show stack_information
show stack_device
config box_id current_box_id <value 1-4> new_box_id [auto | <value 1-4>]
config box_priority current_box_id <value 1-4> priority <value 1-63>
config my_box_id [auto | <value 1-4>]
config my_box_priority <value 1-63>
enable Specifies that the Switch's stacking capability will be enabled.
disable Specifies that the Switch's stacking capability will be disabled.
Zxxx0:admin# config stacking_mode enable
Command: config stacking_mode enable
Change Box stacking_mode may cause devices restart !
Please wait, the switch is rebooting...
ワヰヵユ ワヰヵユ