Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 937 / 1058

84. Utility Commands
938

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
To upload the current configuration from the device to an RCP server:
84.7. upload firmware_toRCP

Description
This command is used to upload firmware from a device to a Remote Copy Protocol
(RCP) server.

Format
upload firmware_toRCP [{username <username>} {<ipaddr>} dest_file
<path_filename 64> | rcp: <string 128>] {unit <unit_id 1-4>} {src_file <pathname>}
unit (Optional) Specifies which unit on the stacking system. If it is not specified, it refers to the
master unit.
<unit_id 1-4>
Enter the unit ID used here. This value must be between 1 and 4.
src_file (Optional) Specify the path name of the source file.
<pathname>
Specify the path name of the source file. Note that if no path name is specifies,
only the current device configuration will be uploaded.
include (Optional) Includes lines that contain the specified filter string.
exclude (Optional) Excludes lines that contain the specified filter string.
begin (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80>
Specify a filter string enclosed by the quotation mark symbol. Thus, the filter string
itself cannot contain the quotation mark character. The filter string is case
sensitive.
<filter_string 80>
Specify a filter string enclosed by the quotation mark symbol.
<filter_string 80>
Specify a filter string enclosed by the quotation mark symbol.
Zxxx0:admin#upload cfg_toRCP username rcp_user 10.48.74.121 dest_file /home/
Zxxx0.cfg
Command: upload cfg_toRCP username rcp_user 10.48.74.121 dest_file /home/Zxxx0.cfg
Connecting to server... Done.
Upload configuration... Done.
Zxxx0:admin#