Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 528 / 1058

48. MAC Notification Commands
529
48.MAC Notification Commands
These commands are used to send a notification to the management server using
a SNMP trap when a new entry is registered in the MAC address table of this
Switching Hub. It detects access to the network from unauthorized devices.
Figure 48-1 MAC Notification overview
48.1. enable mac_notification

Description
This command is used to enable the trap notification for new learned MAC addresses
on the Switch.

Format
enable mac_notification
enable mac_notification
disable mac_notification
config mac_notification {interval <int 1-2147483647> | historysize <int 1-500>}(1)
config mac_notification ports [<portlist> | all] [enable | disable]
show mac_notification
show mac_notification ports {<portlist>}