Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 959 / 1058

85. Virtual Router Redundancy Protocol (VRRP) Command List
960
85.4. config vrrp vrid

Description
This command is used to configure the virtual router settings by VRID.
 Format
config vrrp vrid <vrid 1-255> ipif <ipif_name 12> {state [enable | disable] | priority <int
1-254> | ipaddress <ipaddr> | advertisement_interval <int 1-255> | preempt [true |
false] | critical_ip <ipaddr> | critical_ip_state [enable | disable]}

Parameters
Zxxx0:admin# create vrrp vrid 1 ipif System ipaddress 10.90.90.91 state enable
Command: create vrrp vrid 1 ipif System ipaddress 10.90.90.91 state enable
Success.
Zxxx0:admin#
vrid Specifies the ID of the Virtual Router used.
<vrid 1-255>
Enter the Virtual Router ID used here. This value must be between 1 and 255.
ipif Specifies the IP interface used for this configuration.
<ipif_name 12>
Enter the IP interface name used here. This name can be up to 12 characters long.
state (Optional)Specifies the state of the virtual router function.
enable
Specifies that the virtual router function will be enabled.
disable
Specifies that the virtual router function will be disabled.
priority (Optional) Specifies the priority to be used for the Virtual Router Master election process
<int 1-254>
Enter the priority value used here. This value must be between 1 and 254.
ipaddress
Specifies the virtual router's IP address used.
<ipaddr>
Enter the virtual router's IP address used here.
advertisement_interval
(Optional) Specifies the time interval used between sending advertisement messages.
<int 1-255>
Enter the advertisement interval value here. This value must be between 1 and 255
seconds.