Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 435 / 1058

38. IP Routing Commands
436
38.IP Routing Commands
IP routing is a process to transfer packets based on the destination IP
address in TCP/IP network. Destination information is managed in a
routing table in this Switching Hub.
In this chapter, you will display/delete a routing table and register
items manually.
You can configure each table for IPv4 and IPv6.
IPv4 routing table
IPv6 routing table
In addition, you can configure whether to use or not routing algorithm
ECMP (Equal Cost Multi Path) for OSPF (Open Shortest Path First), a
protocol that automatically determines routing.
IP Address/Netmask Gateway Interface Cost Protocol
------------------ --------------- ------------ -------- --------
10.0.0.0/8 0.0.0.0 System 1 Local
IPv6 Prefix: ::/0 Protocol: Static Metric: 1
Next Hop : FEC0::5 IPIF : System
create iproute [default | <network_address>] [null0 | <ipaddr> {<metric 1-65535>} {[primary |
backup | weight <value 1-4>]} | ip_tunnel <tunnel_name 12>]
delete iproute [default | <network_address>] [null0 | <ipaddr> | ip_tunnel <tunnel_name 12>]
show iproute {[<network_address> | <ipaddr>]} {[static | rip | ospf | hardware]}
create ipv6route [default | <ipv6networkaddr>] [[<ipif_name 12> <ipv6addr> | <ipv6addr>]
{<metric 1-65535>} {[primary | backup]} | ip_tunnel <tunnel_name 12>]
delete ipv6route [[default | <ipv6networkaddr>] [<ipif_name 12> <ipv6addr> | <ipv6addr> |
ip_tunnel <tunnel_name 12>] | all]
show ipv6route {[<ipv6networkaddr> | <ipv6addr>]} {[static | ospfv3 | hardware]}
enable ecmp ospf
disable ecmp ospf
config ecmp algorithm {ip_destination | [ip_source| crc_low | crc_high] | tcp_udp_port}
show ecmp algorithm