Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 340 / 1058

27. Distance Vector Multicast Routing Protocol (DVMRP) Commands
341

Restrictions
None.

Example
To display DVMRP configurations:
27.5. show dvmrp neighbor
 Description
This command is used to display the DVMRP neighbor table.
 Format
show dvmrp neighbor {ipif <ipif_name 12> | ipaddress <network_address>}

Parameters

Restrictions
None.

Example
To display DVMRP neighbor table:
Zxxx0:admin#show dvmrp
Command: show dvmrp
DVMRP Global State : Disabled
Interface IP Address Neighbor Timeout Probe Metric State
------------ ----------------- ---------------- ----- ------ --------
System 192.168.69.123 35 10 1 Disabled
Total Entries: 1
Zxxx0:admin#
ipif (Optional) Specifies the IP interface name used for the display.
<ipif_name 12>
Enter the IP interface name used for the display here. This name can be up to 12
characters long.
ipaddress
(Optional) Specifies the IP address and netmask of the destination used.
<network_address>
Enter the IP address and netmask of the destination used here.
If no parameter is specified, the system will display the whole DVMRP neighbor table.