Panasonic MEW01091, Руководство по эксплуатации

Страница: 77 / 142

Panasonic Electric Works Nordic AB
MEW01091 Rev: 3 EBL128 Operating Instructions V1.1.x
75
Action Data, etc.
which will be
deleted Data, etc.
which will be
not deleted Restart code
Power down
74
and then power
up again. ("Cold restart")
SSW
FFD, WASV SSD,
S/W 00
Via menu H8/S4 Safe shut down
of control unit. ("Cold restart")
FFD, WASV SSD,
S/W, SSW 00 alt. 03
Automatically after download of
site specific data (SSD) via a PC
& Win128. ("
Warm restart ")
FF, WASV SSD,
S/W, SSW
D
75
03
Automatically after download of
S/W or text file via a PC &
Win128. ("Cold restart")
FFD, WASV SSD,
S/W, SSW 00 alt. 03
Automatically due to external
disturbance.
76
("Cold restart")
FFD, WASV SSD,
S/W, SSW 01, 02 alt.
04-20
NOTE! During the restart, the output "R1" for Fault tx will be
"activated", the supervised 24 V DC outputs S0-S1 will be not
supervised and S0-S1 programmed as normally high will be low for a
few seconds.
During the "restart", no fire alarm can be activated and the buzzer will
sound until the following text messages is show in the display:
*** EBL128 ***
Checking program memory......
And for a second (if everything is all right, else see Memory fault
below):
Booting......
A fault is now generated and the following text message will be
shown in the display:
FAULT: Restart code xx addr yyyy
Date: MM-DD Time: HH:MM
74
Both rectifier (mains) and battery disconnected.
75
All alarm points, zones, units, outputs, COM loop etc. that were disabled
(disconnected) before a warm restart will remain disabled after the restart
provided they also exists in the new downloaded SSD. If not, this
disablement will be terminated.
76
If this happens often, call for service personnel / engineer.