Panasonic MEW01091, Руководство по эксплуатации

Страница: 12 / 142

Panasonic Electric Works Nordic AB
MEW01091 Rev: 3 EBL128 Operating Instructions V1.1.x
10
2.10 Control panel (CP)
The Control Panel is a part of the EBL128 front, intended for the
building occupier, service personnel, etc. to "communicate" with
EBL128
2.11 LED
LED ( L ight E mitting D iode) = Yellow, green or red optical indicator
("lamp").
2.12 External Indicator (LED)
A unit with an LED. Connected to an ASB, CDB or a detector with a
built-in LED, for external indication. Lit when the built-in LED is lit.
2.13 Display / LCD
LCD ( L iquid C rystal D isplay) = Display for presentation of fire
alarms, fault messages, etc. Normally alphanumeric characters and
backlight.
2.14 Door open / Key switch
A door / key switch, which has to be activated in order to get access to
the push buttons on the front. Indicated by the LED "Door open".
2.15 SSD / Site Specific Data
This data is unique for each installation. All alarm points,
presentation numbers, alarm texts, programmable outputs, etc. are
programmed (configured) in the PC program
Win128 and has to be
downloaded in EBL128.
2.16 S/W / Software / System program
The S/W makes the microprocessor in EBL128 work. It is factory
downloaded but a new version can be downloaded on site.