Panasonic MEW01091, Руководство по эксплуатации

Страница: 23 / 142

Panasonic Electric Works Nordic AB
MEW01091 Rev: 3 EBL128 Operating Instructions V1.1.x
21
1. Fire alarms (Normal fire alarms, Heavy smoke / heat alarms and
Key cabinet alarms)
21
2. Co-incidence alarms
3. Pre-warnings
4. Quiet alarms (Normally used on the Australian market only.)
5. AAF zone alarms (Used in the Australian convention only.
22
)
6. Evacuate information (only valid in some conventions)
23
7. Faults (not acknowledged)
8. Disablements
9. Zones in Test mode
10. Interlocking in- / outputs active
21
In the New Zealand convention also Acknowledged alarms (ACK) and
Isolated alarms (ISO).
NOTE! A Fire alarm has a "log off function", i.e. if a menu window is open
when a fire alarm is activated, the fire alarm will be presented instead.
Some information is available and some actions are possible to perform via
the "Fire alarm menu" (X1-X9), see chapter "Fire alarm", page 39.
22
Require special equipment available on the Australian market only.
23
Require special equipment available on the New Zealand market only.
In the New Zealand convention:
a. Silence switch left active
b. Alarm routing equipment isolated
c. Fault routing equipment isolated