Oxford Instruments Cypher SPM, Руководство пользователя

Страница: 212 / 243

Cypher SPM
User Guide
21. Place the cantilever holder.
l
Position the cantilever holder in the cell body as
shown in the image to the right.
l
The cantilever holder should sit level and be rota-
tionally aligned so that the cantilever holder board is
almost touching its mating connector.
22. Press the cantilever holder down.
l
Before starting this process the cantilever holder
must be sitting level with respect to the top of the
cell body.
l
With fingers on both handles of the cantilever
holder, use firm pressure to wiggle the cantilever
down into the cell body.
l
The O-ring will offer some resistance. When the can-
tilever holder is firmly seated, you will feel a hard
stop as metal parts make contact.
23. Rotate the cantilever holder clockwise until you feel a hard stop.
l
The cantilever holder contacts slip into the mating
connector (1).
l
The screws cause the hard stop as they slip into the
matching metal cutouts (2).
24. Tighten the screws.
l
Place pressure on the cantilever holder handles as
shown. Make sure it is firmly seated.
l
Finger-tighten one of the screws and stop as soon as
you feel any resistance.
l
Do the same to the other screw.
l
Release the pressure on the handles and tighten
both screws a tiny bit more.
l
At all times, only hold the screwdriver with your fin-
gertips.
Page 212 of 243 30 Workflows