Interface A2, Release Date: 02.03.2022
Page 85
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
8
Dimensions & Mounting
Sensing Area Size in
mm x mm
Dimensions in mm
A
B
C
D
E
F
100x100
100 100 160 40 145 213
100x200
100 200 160 40 195 313
150x100
150 100 210 65 145 213
200x100
200 100 260 65 145 213
250x100
250 100 310 90 145 213
300x100
300 100 360 115 145 213
100x50
100 52 160 40 121 165
150x50
150 52 210 65 121 165
150x150
150 150 210 65 170 263
200x200
200 200 260 65 195 313
250x250
250 250 310 90 220 363
300x200
300 200 360 115 195 313
400x400
400 400 460 165 295 513
The three M5 threads at the bottom side of the device can be used to mount the device reliable. The
maximun thread reach is 20mm.
Attention:
On delivery, there is a screw in the middle M5 thread at the bottom of the device as
protection against contamination (orange arrow). It must be removed before the devices is
mounted. If this M5 thread is not needed for mounting, it must be guaranteed that the hole
is covered.
9
Sensing Area End Section
Basically, the light curtain may be operated without end section. Please note, however, that this will affect the
measurement accuracy and that the sensing area thereby will not increase in size. With mounted end sec-
tion, the LVMC is better protected against vibrations and against twisting of the two arms.
To remove the end section, first unscrew the two screws
shown in the picture. Then the end section can be easily re-
moved. It is important to reinstall the screws afterwards, as
they contribute significantly to the stability of the arms.
Sensing Area
Sensing Area
End Section
M5 Thread, thread reach: 20mm