Interface A2, Release Date: 02.03.2022
Page 72
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
5.16
Set Optocoupler Outputs Test Function
Via the entry “Set Optocoupler Outputs” in the “Test” menu, a dialog window is opened by which the optocou-
pler outputs can be switched manually, with the exception of output 1 (signal “Monitoring 2”: signaling of
operational readiness). Immediately after opening the dialog box, all available optocoupler outputs are open.
For each available output, the state can now be changed from “Open” to “Conductive”. Changes are not im-
mediately active, the “Apply” button must is pressed first.
5.16.1
Section “Output x: OC State”
Explanation of the available settings:
“Open”:
To select that the optocoupler output should be open.
“Conducting”:
To select that the optocoupler output should be conducting.
5.16.2
Buttons
There are two buttons at the bottom of the dialog box:
Explanation of the buttons:
“Apply”:
Press this button to accept changes.
“Close”:
Press this button to end the test and close the window.