Interface A2, Release Date: 02.03.2022
Page 75
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
5.18
Hints & Error Messages
If the CMT wants to give you a hint or if the CMT or the LVMC has detected a problem, you will be informed
by a message in an automatically opening dialog window. You must acknowledge this message by pressing
the “OK” button before you can carry out further actions in the CMT. Notes are marked by a yellow triangle
with an exclamation mark , an error message with a red framed x . Error messages generated by the
LVMC are always also stored in the error log and can therefore also be viewed after acknowledgement.
Showing notification messages can be deactivated via the “Stop Showing Notification Messages“ entry in the
“Miscellaneous“ menu and, if necessary, activated again by selecting the “Show Notification Messages“ en-
try.
The most likely notice message you'll see informs you that you've made a change to the configuration but
have not yet stored it in the non-volatile memory of the LVMC:
A likely common error message is the detection of stuck objects: If an object is within the sensing area long-
er than specified on the configuration page in the “Maximum Permissible Passing Time” parameter, the
LVMC will detect this and store the error in the error log. If the LVMC is connected to the CMT at this time,
the following dialog box opens:
The LMVC now waits until the sensing area becomes free again. As soon as this has happened, the LVMC
stops and restarts automatically. The LVMC logs this in the error log and the following message is displayed
in the CMT, provided that showing notification messages is activated:
If you reconnect the CMT to an LVMC and the LVMC has detected and logged an error in the current run, a
dialog box prompts you to check the error log, if showing notification messages is activated: