Interface A2, Release Date: 02.03.2022
Page 65
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
“By specified path”:
The distance traveled is fixed.
“Path”:
Enter the path to be used for speed estimation.
This input is only available if the speed estimation is to be carried out with
a specified path.
5.12.6
Section “Sensor Image Capturing”
The section “Sensor Image Capturing” displays information about the captured and possibly saved images.
Explanation of the shown values:
“Captured Sensor Images”: The number of captured sensor images since CMT connected to the LVMC or
since the analysis was reset (by pressing button “Reset Analysis”).
“Saved Sensor Images”:
The number of saved images since CMT connected to the LVMC or since the
analysis was reset (by pressing button “Reset Analysis”).
“Next Filename”:
The filename (with absolute path) that is used to store the next sensor im-
age. It can be set by entry „Choose Folder and Filename to Save Captured
Sensor Images to” in menu “File”.
5.12.7
Buttons
The analysis page offers three buttons at the bottom. Depending on the operating mode, the first button
changes the label between “Start”, when the LVMC is started, and “Stop”, when it is stopped. In the user ac-
cess level, the first button is not available and therefore grayed out. It can only be pressed in administrator
access level.
Example for a device with deactivated saving of sensor images in operating mode „stopped“:
Example for a device with activated saving of sensor images in operating mode „running“:
Explanation of the buttons:
“Start” or “Stop”:
If the LVMC is in operating mode “stopped”, the “Start” button is displayed.
Press the “Start” button to switch to the "running" operating mode.
If the LVMC is in operating mode “Running”, the “Stop” button is displayed.
Press the “Stop” button to switch to the “stopped” operating mode.
“Reset Analysis”:
Press this button to reset the collected analysis data.
„Enable Saving Images“ or
„Disable Saving Images“:
Press this button to enable and disable saving captured sensor images.