Interface A2, Release Date: 02.03.2022
Page 68
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
5.13.3
Section “Automatic Mode Data”
The “Automatic Mode Data“ section, available only if the object detection method “All channels combined,
automatic mode, when object is leaving the sensing area” is selected, contains information on the running
automatic configuration:
Explanation of the shown values:
“Object Count”:
The number of objects captured in automatic mode.
“Area: Average”:
The average area of all objects captured in automatic mode.
“Area: Standard Deviation”:
The standard deviation of the area of all objects captured in auto-
matic mode.
“Passing Time: Average”:
The average passing time of all objects captured in automatic
mode.
“Passing Time: Standard Deviation”:
The standard deviation of the passing time of all objects captured
in automatic mode.
5.13.4
Buttons
The page offers two buttons at the bottom. Depending on the operating mode, the first button changes the
label between “Start”, when the LVMC is started, and “Stop”, when it is stopped. In the user access level, the
first button is not available and therefore grayed out. It can only be pressed in administrator access level.
Explanation of the buttons:
“Start” or “Stop”:
If the LVMC is in operating mode “stopped”, the “Start” button is dis-
played. Press the “Start” button to switch to the "running" operating
mode.
If the LVMC is in operating mode “Running”, the “Stop” button is dis-
played. Press the “Stop” button to switch to the “stopped” operating
mode.
“Reset Statistics & Histogram”:
Press this button to reset the collected analysis data.