OPTRONIC LVMC, Руководство пользователя, Страница: 36 / 97

Interface A2, Release Date: 02.03.2022 Page 36 LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND Unteregger Strasse 53
CH-9403 Goldach Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: support@optronic.ch
web: www.optronic.ch
5.8.4 Menu „Miscellaneous“
Explanations of the available menu entries:

Via the entry “Show information about the LVMC”, detailed information about the fixed properties of the
light curtain can be viewed. Detailed information can be found in chapter 5.15.

Via the entry “Switch Language to German” the language used in the CMT can be switched to German.
The menu and the five pages are immediately rebuilt in German. Messages already in the log remain in
German, new messages appear in English. The entry “Switch Language to English” switches the lan-
guage back to English.

Via the entry “Switch to Administrator Access Level”, the access level can be switched to administrator.
If an administrator password is set, it must be entered to authorize the switch. The entry “Switch Back to
User Access Level” can be used to switch back to the user access level.
 Via the entry “Set Administrator Password”, the administrator password required to switch to the admin-
istrator access level can be set. No password is set on delivery. If a password is set, it must be entered
before assigning a new password. For security reasons, the new password must be entered twice.

Via the entry “Change CMT Password”, the password required for access control when establishing a
connection via Ethernet can be set. This is useful because the LVMC can be accessed via Ethernet from
any network node.
Connection via USB is possible at any time without entering a password.

Via the entry “Show Internal Data”, displaying additional values on the status page can be enabled. The
additional values displayed are not relevant for normal operation and will not be discussed further in this
manual. If necessary, OPTRONIC AG will ask you to activate the display of these values for a deeper
problem analysis. Entry “Stop Showing Internal Data” can be used to deactivate again the display of
these additional values. The setting made is saved beyond the CMT has been terminated, i.e. after a re-
start of the CMT, the last setting made is automatically selected again.

Via the entry “Show Notification Messages”, displaying notification messages can be enabled. These
messages often provide you with additional important information, but can hinder a fast operation. You
can disable the display of these notification messages via the entry “Stop Showing Notification Messag-
es”. The setting made is saved beyond the CMT has been terminated, i.e. after a restart of the CMT, the
last setting made is automatically selected again.