Interface A2, Release Date: 02.03.2022
Page 83
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
RC_COMMAND_GET_STATUS
To query the operating state ("stopped" or "running"), the signal intensity
of the sensor (OK or signal intensity of the sensor has fallen below the
warning limit permanently stored in the device), the last error that oc-
curred, the counter readings of the channels and the counter readings of
the outputs.
RC_COMMAND_GET_TIMER
To query the timers.
RC_COMMAND_PUT_
CONFIGURATION_SENSOR
To set the object detection method, the minimum required object size,
the minimum required passing time, and the maximum permissible
passing time.
RC_COMMAND_PUT_
CONFIGURATION_CHANNELS
To set the configuration of all supported channels: the minimum size,
the minimum area, The minimum passing time, the gap suppression
time, and the minimum expected passing time.
RC_COMMAND_PUT_
CONFIGURATION_OUTPUTS
To set the quantity of each output that is assigned a function in mode
“quantity” (see field “Quantity” in section “I/O Configuration” on the con-
figuration page).
RC_COMMAND_START
To switch to the operating mode “running”.
RC_COMMAND_STOP
To switch to the operating mode “stopped”.
RC_COMMAND_RESET_COUNTER
S
To reset the counter readings of the available channels.
RC_COMMAND_AUTOMATIC_
MODE_RESTART
To restart the automatic mode.
OPTRONIC AG provides a reference implementation in the form of a client running under Windows, which is
also available as source code on request. The executable client is available for download on the OPTRONIC
homepage
in the DOWNLOAD section. The software can also be used directly productive,
for example, by calling it from an application or batch file.