Interface A2, Release Date: 02.03.2022
Page 59
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
Explanation of the shown values:
“Object Detection
Timer”:
Shows in the left field the current running time of the object detection timer. It is 0.0s,
if the timer is never started since the LVMC was started (by power on, or pressing
one of the buttons “Reboot LVMC” or “Start”), or when button “Reset Object Detection
Timer” was pressed. It is counting up if the timing is running.
Shows in the right field the last stopped time of the object detection timer. It is 0.0s, if
the timer is never stopped since the LVMC was started (by power on, or pressing one
of the buttons “Reboot LVMC” or “Start”), or when button “Reset Object Detection
Timer” was pressed.
“General Purpose
Timer”:
Shows in the left field the current running time of the object detection timer. It is 0.0s,
if the timer is never started since the LVMC was started (by power on, or pressing
one of the buttons “Reboot LVMC” or “Start”), or when button “Reset Object Detection
Timer” was pressed. It is counting up if the timing is running.
Shows in the right field the last stopped time of the general purpose timer. It is 0.0s, if
the timer is never stopped since the LVMC was started (by power on, or pressing one
of the buttons “Reboot LVMC” or “Start”), or when button “Reset General Purpose
Timer” was pressed.
5.11.6
Buttons
The status page offers three to five buttons at the bottom, which appear differently depending on the access
level, operating mode, and I/O configuration. Depending on the operating mode, the first button changes the
label between “Start”, when the LVMC is started, and “Stop”, when it is stopped. In the user access level, only
the “Reset Status” button is available, all others are grayed out and can not be pressed.
Example of a device without activated timers in operating mode “stopped”:
Example of a device in operating mode “started”, with both timers activated:
Explanation of the buttons:
“Start” or “Stop”:
If the LVMC is in operating mode “stopped”, the “Start” button is displayed.
Press the “Start” button to switch to the "running" operating mode.
If the LVMC is in operating mode “Running”, the “Stop” button is displayed.
Press the “Stop” button to switch to the “stopped” operating mode.
“Reset Counters”:
Press this button to reset the object counters of all channels and signals to 0.
“Reset Status”:
Press this button to reset the passing time information of all channels.
“Reset Object Detection
Timer”:
Press this button to reset the object detection timer.
“Reset General Purpose
Timer”:
Press this button to reset the general purpose timer.