OPTRONIC LVMC Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 97

OPTRONIC LVMC Скачать руководство пользователя страница 54

Interface A2, Release Date: 02.03.2022

Page 54

LVMC User Manul A2 - 499.027.82

OPTRONIC AG
SWITZERLAND

Unteregger Strasse 53
CH-9403 Goldach

Phone: +41 (0)71 844 02 00
Fax:

+41 (0)71 844 02 10

e-mail: [email protected]
web: www.optronic.ch

5.10.6

Buttons

The configuration page offers four buttons at the bottom, which appear differently depending on the access
level and the operating mode:
None of the buttons are available at the user access level, so they are all grayed out:

All buttons are available in the administration access level in operating mode “stopped”. The text of the but-
ton “Save Configuration” is red, if configuration changes have not yet been saved in the non-volatile memory:

In the administration access level in operating mode “running”, only the “Stop” button can be pressed:

Explanation of the buttons:

“Start” or “Stop”:

If the LVMC is in operating mode “stopped”, the “Start” button is displayed.
Press the “Start” button to switch to the "running" operating mode.
If the LVMC is in operating mode “Running”, the “Stop” button is displayed.
Press the “Stop” button to switch to the “stopped” operating mode.

“Store Configuration”:

The text of this button is shown in red when the content of the volatile con-
figuration set differs from the content of the nonvolatile set, i.e. made con-
figuration changes were so far not stored in nonvolatile memory.
By pressing this button, the current contents of the volatile set will be copied
into the nonvolatile set.
The button is only available, if the LVMC is in operating mode “stopped”.

“Discard Changes”:

By pressing this button, the contents of the volatile set will be overwritten by
the contents of the nonvolatile. All changes made since the last time button
“Store Configuration” is pressed get lost.
The button is only available, if the LVMC is in operating mode “stopped”.

“Reboot LVMC”:

Pressing this button restarts the LVMC. During the boot process, the connec-
tion between CMT and LVMC is interrupted. It is automatically restored after
starting up.
Be aware that you must press button “Store Configuration” prior to that, if you
have made any changes to the configuration parameters and want to keep
them.
The button is only available, if the LVMC is in operating mode “stopped”.

«
...
52
53
54
55
56
...
»

Содержание LVMC


































































































Отзывы:

Нет отзывов