Interface A2, Release Date: 02.03.2022
Page 48
LVMC User Manul A2 - 499.027.82
OPTRONIC AG
SWITZERLAND
Unteregger Strasse 53
CH-9403 Goldach
Phone: +41 (0)71 844 02 00
Fax:
+41 (0)71 844 02 10
e-mail: [email protected]
web: www.optronic.ch
“Rolling: Quantity”:
This parameter is only used, if data about objects passing the sensing area is
collected in rolling mode. The rolling mode can be enabled by marking check-
box “Rolling: Mode”.
“Self-Restart: Mode”:
If this checkbox is marked, the automatic mode is restarted when no object
has passed the sensing area for more than the time entered in parameter “Self-
Restart: Delay”. All collected data and learned information about objects that
have previously passed the sensing area is flushed. This mode is useful, if no
external device is present that can stop and thereafter start the LVMC again, in
order to manually restart automatic mode. After the restart, the LVMC is ready
to detect and count different objects.
“Self-Restart: Delay”:
This parameter is only used, if the self-restart function of the automatic mode
is enabled. This function can be enabled by marking checkbox “Self-Restart:
Mode”.
“Captured Quantity”:
The number of objects used for learning.
“Average Area”:
The average area calculated by use of the information learned.
“Minimum Areas”:
The three output fields „Minimum Areas“ show the minimum areas calculated
from the learned information, which can be used to distinguish between too
small, correct, two-chained and three chained objects.
5.10.4
Section “Channel Configuration”
The parameterization of the available channels is done in the section “Channel Configuration”. Each line con-
tains the settings for one channel. Depending on the object detection method selected, not all settings are
available:
Appearance for the object detection methods “Each channel separately, while object within sensing area”
and “Each channel separately, when object is entering the sensing area”:
Appearance for the object detection methods “ Each channel separately, when object is leaving the sensing
area” and “All channels combined, manual mode, when object is leaving the sensing area”:
Appearance for the object detection method “ All channels combined, automatic mode, when object is leav-
ing the sensing area”: