Omron R88D-GT series, Руководство пользователя

Страница: 462 / 510

8-13
8-3 Troubleshooting
8
Troubleshooting
40
Absolute encoder
system down error Occurs when the power
supply is turned ON or
during operation.
• The voltage supplied
to the absolute
encoder is low.
• Set up the absolute
encoder.
• Connect the battery
power supply.
41
Absolute encoder
counter overflow error Occurs during operation.
•
The multi-turn counter
of the absolute
encoder exceeds the
specified value.
•
Properly set the
Operation Switch
when Using Absolute
Encoder (Pn0B).
42
Absolute encoder
overspeed error
Occurs when the power
supply is turned ON.
• The Servomotor
rotation speed
exceeds the specified
value when the battery
power supply is turned
ON.
• The wiring is incorrect.
• Lower the Servomotor
rotation speed and
supply power.
•
Check the wiring.
44
Absolute encoder
one-turn counter error
Occurs when the power
supply is turned ON.
• The encoder is faulty. • Replace the Servomo-
tor.
45
Absolute encoder
multi-turn counter er-
ror
Occurs when the power
supply is turned ON.
• The absolute encoder
detected a counter er-
ror.
•
The incremental en-
coder detected a
counter error.
• Replace the Servomo-
tor.
46 Encoder error 1
Occurs when the power
supply is turned ON
•
The Servomotor is
faulty.
•
Replace the Servo
Drive.
•
Replace the Servomo-
tor.
47
Absolute encoder
status error
Occurs when the power
supply is turned ON.
• The Servomotor was
moving when the
power supply was
turned ON.
• Do not let the Servo-
motor move when the
power supply is turned
ON.
48 Encoder phase Z error Occurs during operation.
•
A phase-Z pulse from
the encoder was not
detected regularly.
•
Replace the Servomo-
tor.
49
Encoder PS signal
error
Occurs during operation.
•
A logic error was
detected in the PS
signal from the
encoder.
•
Replace the Servomo-
tor.
58 CPU error 1
Occurs when the power
supply is turned ON. • The Servo Drive is
faulty.
• Replace the Servo
Drive.
60 CPU error 2
Occurs when the power
supply is turned ON.
•
The Servo Drive is
faulty.
•
Replace the Servo
Drive.
61 CPU error 3
Occurs when the power
supply is turned ON. • The Servo Drive is
faulty.
• Replace the Servo
Drive.
62 CPU error 4
Occurs when the power
supply is turned ON.
•
The Servo Drive is
faulty.
•
Replace the Servo
Drive.
63 CPU error 5
Occurs when the power
supply is turned ON. • The Servo Drive is
faulty.
• Replace the Servo
Drive.
65
Excessive analog
input 2
Occurs during operation.
•
The voltage input to
pin 16 is too high.
•
Reduce the input
voltage.
•
Change the value for
Pn71.
Alarm
code
Error Status when error occurs Cause Countermeasure
ABS
ABS
ABS
ABS