NTT docomo FOMA N700?, Руководство пользователя

Страница: 492 / 597

489
Continued on next page
D
at
a Co
mm
u
n
icatio
n
How to disconnect
Since just closing the browser on your PC may not
disconnect, be sure to disconnect by the following
procedure:
1
Double-click the dial-up icon in the
task tray.
The dial-up connection screen will appear.
2 Click “ 切断 ” (Disconnect).
When this happens
● Please check the following if you cannot connect to the
network or dial-up successfully.
Uninstalling the FOMA PC setting software
This section describes uninstallation instructions for FOMA
PC setting software.
● To uninstall the “FOMA PC Setting Software” on Windows
2000 or Windows XP, you must do so from a user account
with Administrator privileges. If you attempt to uninstall the
software from another account, an error occurs. Contact
your PC’s manufacturer or Microsoft for information on how
to set Administrator privileges on your PC.
Note
●
The communication speed displayed on the PC may be different
from the actual communication speed.
Dial-up icon
Problem Points to check
“FOMA N700i”
is not
recognized
by the PC. ・ See if your PC satisfies the operational
environment required (P. 475).
・ See if the N700i communication setting file has
been installed.
・ See if the FOMA terminal is connected to the PC
and the power is turned on.
・ See if the FOMA USB cable (optional) is firmly
connected.
・ See if the “USB mode setting” (P. 404) is set to
“Communication mode”.
Unable to
connect with
the access
point. ・ See if the settings for the ID (user name) and
password are correct.
・ See if the FOMA USB cable (optional) is firmly
connected.
・ If the access point requires the Caller ID, make
sure that “184” is not added to the phone
number.
・ See if the box of “ フロー制御を使う ” (Use
the flow control) of the modem property is
checked.
・ See if the APN is set correctly.
・ If you still cannot connect to the other end after
checking the above, consult with the Internet
service provider or network administrator about
the setting method.