NTT docomo FOMA N700?, Руководство пользователя

Страница: 130 / 597

127
Tone
/Di
spl
ay
/L
ig
htin
g S
etti
n
g
s
Continued on next page
Setting the image display during a call
In the indicator display setting display...
a
P. 126
1
Press
1
“Display information”
s
Press
4
“Connection”
s
Choose from the
following options:
<Display light>
Setting the Display and Keypad Lighting
Default settings Lighting: ON (lit) + Saver (5-minute delay) Charging: Standard
Area: LCD+Keys Brightness: Level 2
Use this procedure to specify the lighting settings for the display and keypad.
1
Press
i70 s
Choose from the following options:
Note
● When the indicator display is set to “OFF”, nothing will be displayed, except for the camera-in-operation condition and some of the alarm notices.
● If you select “Digital 2” in “Clock type”, this also applies to the “Display” setting in “Clock display”.
● The time displayed when “Analog 1-3” is set is an approximate guide only.
● Even if you set “Mail” display to “ON”, the mail sorted into a folder to which mail security has been set is not displayed.
1
ON
s
Select
1
“ON” or
2
“OFF”.
Displays the state under a call and sets the backlight to “ON”.
2
OFF Does not display the state under a call.
1
Lighting
s
Choose from the following options:
Selects the normal lighting settings for the backlight.
1
ON
s
Choose from the following options:
Sets the Power saver mode options.
1
ON
s
Enter a delay time (02-20 minutes).
Once the specified delay has elapsed, the stand-by display and indicator
display turn off (Power saver mode).
Set the delay before the FOMA terminal switches to Power saver mode.
Enter the time as a 2-digit number. To use the time already displayed,
just press
d
.
2
OFF Disables Power saver mode.
2
OFF
s
Choose from the following options:
Sets the Power saver mode options.
1
ON
s
Enter a delay time (02-20 minutes).
Once the specified delay has elapsed, the stand-by display and indicator
display turn off (Power saver mode).
Set the delay before the FOMA terminal switches to Power saver mode.
Enter the time as a 2-digit number. To use the time already displayed,
just press
d
.
2
OFF
Disables Power saver mode.
2
Charging
s
Selects
1
“Standard” or
2
“All time ON”.
Selects the lighting settings for the backlight during charging.
3
Area
s
Choose from the following options:
Selects the area that is backlit.
1
LCD+Keys Sets backlighting for the LCD panel and keypad.
2
LCD
Sets backlighting for the LCD panel only.
4
Brightness
s
Selects
1
“Level 3”,
2
“Level 2” or
3
“Level 1”.
Selects the brightness.