NTT docomo FOMA N700?, Руководство пользователя

Страница: 515 / 597

512
D
at
a Co
mm
u
n
icatio
n
AT+CPIN Enter the PIN code in the FOMA
terminal. Format: AT+CPIN=“<pin>”,“<newpin>”
This command is to enter the PIN1,
PIN2, or PUK (PIN unlock) code -
depending on the state of the result
code returned when AT+CPIN? is
entered - of the FOMA terminal. Even if
PIN code entry or the PUK code is
requested on the screen, depending
on the state of the result code when
AT+CPIN? is entered, you may not be
able to use this command to enter the
PIN. Do not use this command to
change PIN code. Put <pin> and
<newpin> in “ ”.
AT+CPIN? result
+CPIN:READY:PIN1 code, PIN2 code
Cannot enter the PIN1 or PIN2 PUK code
+CPIN:SIM PIN:PIN1 entry standby
+CPIN:SIM PIN2:PIN2 entry standby
+CPIN:SIM PUK:PIN1 blocked
(Can enter PIN1 PUK code)
+CPIN:SIM PUK2:PIN2 blocked
(Can enter PIN2 PUK code)
Commands on the right are the entry
sample of PIN code “1234” and PUK
code “12345678”.
(The status in which +CPIN:
READY is answered when
+CPIN? is entered)
AT+CPIN=“1234”
ERROR
(The status in which +CPIN:
READY is answered when
+CPIN? is entered)
AT+CPIN=“12345678”,
“1234”
ERROR
(The status in which +CPIN:
SIM PIN is answered when
+CPIN? is entered)
AT+CPIN=“1234”
OK
(The status in which +CPIN:
SIM PIN2 is answered when
+CPIN? is entered)
AT+CPIN=“1234”
OK
(The status in which +CPIN:
PUK is answered when
+CPIN? is entered: PIN1
blocked status)
AT+CPIN=“12345678”,
“1234”
OK
(The status in which +CPIN:
PUK2 is answered when
+CPIN? is entered: PIN2
blocked status)
AT+CPIN=“12345678”,
“1234”
OK
AT+CPIN?
+CPIN:READY
OK
AT+CPIN=?
OK
AT+CR=n
[&F] [&W]
When the line is connected, display
the bearer service type before the
CONNECT result code is displayed. n=0 : Not display (initial value).
n=1 : Display.
serv:
GPRS : Packet communication
SYNC : 64K data communication
AV64K : AV64K communication
AV32K : AV32K communication
AT+CR?:
Display the current setting.
AT+CR =1
OK
ATD
＊ 99 ＊＊＊ 1#
+CR : GPRS
CONNECT
(
＊ 99 ＊＊＊ 1# is an
example for mopera packet
communication)
AT command Outline Description of parameters
Command execution
example