NTT docomo FOMA N700?, Руководство пользователя

Страница: 425 / 597

422
Oth
er Useful
F
unc
ti
on
s
<Multi access>
Multi Access
Multi Access is a function that allows voice calls, packet communication and SMS to be conducted at the same time.
This enables you to receive mails while you are talking to someone on the FOMA terminal or make a voice call while
using the i-mode services.
Communication lines that can be used concurrently
Using the Multi Access function, the FOMA terminal can concurrently use the 3 communication lines listed below.
When you receive a call during communication
●
Receiving i-mode mail during a voice call
If you receive i-mode mail during a voice call when “Receiving display” is set to “Operation preferred”, the Talking
display remains while the i-mode mail is received. You can read the i-mode mail without hanging up your voice call.
1
Hold down
u
for 1 second or longer.
The display changes to the i-mode mail Received result display.
■ To change displays from the Task menu
For information on using the Task menu to change displays → P. 426
2
Read the i-mode mail.
For information on reading i-mode mail → P. 277
3
Hold down
u
for 1 second or longer.
The display changes to the Talking display.
Type of communication Lines used
Voice call 1 line
i-mode, i-
α
ppli or i-mode mail Either one
Packet communication with PC connected
SMS 1 line
Note
●
Communication charges apply for each of the lines used during multi access communication.
●
While multi access cannot be used during a video-phone call, only SMS can be received.
●
While multi access cannot be used during 64K data communication, only SMS can be received/sent.
Note
● If you receive i-mode mail or a Message Request or Message Free during a voice call, the icon for received mail type flashes and then lights without
a ring tone to notify you of the received message.
● If “Alarm preferred” is selected in “Receiving display”, the icon flashes when you receive i-mode mail during a voice call and the display
changes to the Receiving i-mode mail display.
切替
ＦＵＮＣ
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
Ｍａｉｌ １０
Ｍｅｓｓａｇｅ Ｒｅｑｕｅｓｔ ２
Ｍｅｓｓａｇｅ Ｆｒｅｅ ０
Ｒｅｔｕｒｎ
Ｒｅｃｅｉｖｅｄ ｒｅｓｕｌｔ
Ｓｅｌｅｃｔ