NTT docomo FOMA N700?, Руководство пользователя

Страница: 501 / 597

498
D
at
a Co
mm
u
n
icatio
n
Specifying Caller ID
Default setting Set
● You can set whether to notify the other person of your caller
ID when “packet communication” is carried out. Since the
caller ID is important information, please take care when
you send your caller ID.
● You can set up the Notify or not notify Caller ID setting
using the AT command prior to a dial-up connection.
● Use the ＊ DGPIR command (P. 509) to notify or not the
caller ID or change back to “Not set” (Default value).
1
Start Hyper terminal.
2 Set up Notify (186) or Not notify (184) Caller
ID for packet communication.
Enter in the format of “AT ＊ DGPIR=<n>”.
To automatically attach 184 (Not notify) for dialing
an outgoing call/ answering an incoming call
Enter the following:
AT
＊
DGPIR=1
To automatically attach 186 (Notify) for dialing an
outgoing call/answering an incoming call
Enter the following:
AT ＊ DGPIR=2
3
Confirm that “OK” is displayed and
click “
ハイパーターミナルの終了
”
(Close Hyper terminal) in the “
ファイ
ル
” (File) menu.
About 186 (Notify)/184 (Not notify) settings in Dial-up
Network
You can attach 186/184 to the access point ID in the Dial-up
network settings as well.
The table below shows what happens if you have set 186/184
both for the
＊
DGPIR command and the Dial-up network
setting.
Setting up Dial-up
Setting up dial-up on Windows 98, Windows Me
1 Open “ スタート ” (Start) → “ プログ
ラム ” (Programs) → “ アクセサリ ”
(Accessories) → “ 通信 ”
(Communications) → “ ダイヤルアッ
プネットワーク ” (Dial-up Network).
Dial-up
network
setting (for
cid=1)
Notify/Not
notify setting
by
＊
DGPIR
command
Notify/Not notify
Caller ID
＊99＊＊＊
1#
Not set Notify
Not notify Not notify
Notify Notify
184＊99＊
＊＊1#
Not set Not notify (Dial-up network
notification 184 has the
priority)
Not notify
Notify
186＊99＊
＊＊1#
Not set Notify (Dial-up network
notification 186 has the priority)
Not notify
Notify
Note
●
The Caller ID needs to be set to “Notify” to use DoCoMo’s internet
connection service mopera.