NTT docomo FOMA N700?, Руководство пользователя

Страница: 473 / 597

470
Netw
o
rk Ser
vices
Activating the call handling settings during
another call <Set arrival act>
● You cannot specify incoming call settings during a call
where “
” is being displayed.
1
Press
i
s
Select and press
d
s
Press
9
“Set arrival act”
s
Choose from the following options:
Ending the current voice call or 64K data
communication to answer a received call
● When the current call and new call are the same type
<Example: Ending the current voice call to answer a
received call>
1
When you hear a repeated soft double-
beep during the call, press
y
.
This ends the current call and the FOMA terminal
starts ringing.
■ Video-phone or 64K data communication
When you end the call, a message appears
notifying you that you can answer the other call.
Press
d s
Press
y
.
2
Press
r
or
d
.
This accepts the incoming voice call.
■
64K data communication
Take the call on the PC.
● When the current and incoming calls are different
types
If you receive a video-phone call or 64K data
communication during a voice call, or if you receive a voice
call or 64K data communication during a video-phone call,
or if you receive a voice call or video-phone during 64K
data communication, use the procedure below to end your
current call or 64K data communication so that you can
answer the incoming call.
<Example: Ending an active video-phone call to answer an
incoming voice call>
1 When you hear the double tones
(“bibip...bibip...”) during a call and a
message* appears, press
d
.
*: A message appears notifying you that you can
answer the new call by ending the current call.
2 Press
u s
Select “V-phone call” and
then press
d s
Press
y
.
3 Press
r
or
d
.
Manually rejecting calls or transferring calls to
Voice mail or Call forwarding
<Example: When “Set arrival act” is set to “Activate”
and “Arrival call act” is set to “Answer”>
1
When you hear a repeated soft double-
beep during the call, press
p
(FUNC).
4
Answer When another voice call arrives while talking
on the phone, the new call is handled by the
“Call waiting” service if “Call waiting” service is
activated. During a voice call (“Call waiting”
service is deactivated) or during a video-phone
call or 64K data communication, the call can
be handled in any of the following ways:
・ You can end the current voice call, video-
phone call or 64K data communication and
answer the received voice call, video-
phone call or 64K data communication.
・ You can use the function menu to manually
handle a voice call, video-phone call, or
64K data communication received during a
call.
→ P. 470
・ If “Voice mail” service or “Call forwarding”
service is activated, calls can be handled
using those service settings.
Note
● If a voice call, a video-phone call or a 64K data communication
comes in while you are talking when “Voice mail” service or “Call
forwarding” service is activated, that call or communication may be
connected to the voice mail service center or forwarded to
specified destination after the incoming call image appears.
1
Activate
s
Select “YES” and press
d
.
2
Deactivate
s
Select “YES” and press
d
.
3
Status
request
s
Select “YES” and press
d
.
Note
●
To set up or check this function, use a FOMA terminal with your
own FOMA card (UIM) inserted. You cannot remotely operate this
function from a general phone, a public phone or other mobile
phone. There are no call charges for setting up or checking this
function.
●
If you are subscribed to “Voice mail service” or “Call forwarding
service”, this function is activated.
Note
● If you have activated the “Voice mail” service or “Call forwarding”
service and the ringing time expires while you can still hear the
double tones (“bibip...bibip...”), the call is connected to the Voice
Mail Center or the forwarding number.