NTT docomo FOMA N700?, Руководство пользователя

Страница: 523 / 597

520
D
at
a Co
mm
u
n
icatio
n
Result code display example
■ When ATX0 is set
Regardless of the AT¥V
n
(P. 514) setting, only
CONNECT appears when the connection is completed.
Character indication example:
ATD ＊ 99 ＊＊＊ 1#
CONNECT
Numeral indication example:
ATD
＊
99
＊＊＊
1#
1
■ When ATX1 is set
・ When AT¥V0 is set (default)
Display in CONNECT <rate between the FOMA
terminal and the PC> format is made when the
connection is completed.
Character indication example:
ATD ＊ 99 ＊＊＊ 1#
CONNECT 460800
Numeral indication example:
ATD ＊ 99 ＊＊＊ 1#
1 21
・
When AT¥V1 is set
*
The following format appears when the connection
is completed:
CONNECT <rate between the FOMA terminal and
the PC> PACKET <Connecting party’s APN>/
<Upstream (the FOMA terminal → Wireless base
station) maximum rate>/<Downstream (the FOMA
terminal ← Wireless base station) maximum rate >
The following sample indicates that a connection
was made to mopera.ne.jp at maximum 64kbps for
sending, and maximum 384kbps for receiving.
Character indication example:
ATD
＊
99
＊＊＊
1#
CONNECT 460800
PACKET mopera.ne.jp
/64/384
Numeral indication example:
ATD
＊
99
＊＊＊
1#
1 21 5
*: If both ATX1 and AT¥V1 are set simultaneously, a
dial-up connection may not be correctly made.
The single setting of AT¥V0 is recommended.
List of disconnection reasons
Disconnection reasons regarding the content of requests
are the following:
■
Packet communication
■ 64K data communication
Note
● The result code appears as character indication (default value) when ATVn command (P. 516) is set to n=1, and as number indication when the
command is set to n=0.
● Though the communication speed appears in order to maintain a compatibility with the modem connected by traditional RS-232C, it differs from the
actual connection speed because the FOMA terminal and PC are connected by FOMA USB cable.
● “RESTRICTION” (Number indication: 100) indicates that the packet network is congested. If this is displayed, wait a while and try again.
Value Reason
27 Missing or unknown APN.
30 Activation rejected by the network.
33 Requested service option not subscribed.
36 Regular deactivation.
Value Reason
1 The number specified does not exist.
16 Disconnected successfully.
17 Cannot communicate because the other party’s line is busy.
18 Dialed, but no response within the specified time.
19 Cannot communicate because the other party is ringing.
21 The other party has rejected the communication.
63 The service and option of the network is not valid.
65 A transmission capacity not provided has been specified.
88 Sent to a terminal with different terminal attributes or received
call.