NTT docomo FOMA N700?, Руководство пользователя

Страница: 519 / 597

516
D
at
a Co
mm
u
n
icatio
n
ATS30=n Disconnects the line when there is no
user data exchange for the time set in
this command. n=0 : Inactive timer off (initial value)
n=0 to 255 ATS30=0
OK
ATS30?
000
OK
ATS30=?
ERROR
ATS103=n Sets the called subaddress character. n=0 : ＊
n=1 : / (initial value)
n=2 : ¥ (¥ mark or back slash)
ATS103=0
OK
ATS103?
000
OK
ATS103=?
ERROR
ATS104=n Sets the calling subaddress
character. n=0 : #
n=1 : % (initial value)
n=2 : & ATS104=0
OK
ATS104?
000
OK
ATS104=?
ERROR
ATVn
[&F] [&W]
Specify whether the result code is
returned in numeral or alphabetical
characters. n=0 : Return the result code in numeral value.
n=1 : Return the result code in characters
(initial value).
ATV1
OK
ATXn
[&F] [&W]
Specify whether the speed indication
is present in the CONNECT display
when connecting the line.
Also detect a busy tone or a dial tone. n=0 : Without dial tone detection; without busy
tone detection; without speed display.
n=1 : Without dial tone detection; without busy
tone detection; with speed display.
n=2 : With dial tone detection; without busy
tone detection; with speed display.
n=3 : Without dial tone detection; with busy
tone detection; with speed display.
n=4 : With dial tone detection; with busy tone
detection; with speed display (initial
value).
ATX1
OK
ATZ Reset the current setting to the
contents of the non-volatile memory.
If this command is input during
communication, the line will be
disconnected. — (In online command mode)
ATZ
NO CARRIER
(In offline command mode)
ATZ
OK
+++ In response to the escape sequence,
the online data mode changes to the
online command mode while
maintaining the line connection. — (Online data mode)
+++ (No display)
OK
AT command Outline Description of parameters
Command execution
example