NF FRA51602, Инструкция по эксплуатации

Страница: 71 / 286

3.4 Operation tree
3
-
33
FRA 51602
3.4 Operation tree
The operation tree for operating this instrument from its panels is presented below. For more information
on the keys and screen notation, please refer to " 3.1 Function and use of each part of the panels ".
Front panel
MENU
key : Top menu display on/off
ENTER
key : Confirm setting
CANCEL /ESC
: Cancel setting
BASIC SETUP
key : Open dialogue that lists frequently-set parameters
[SWEEP LOWER]
: Set the sweep lower frequency limit
[SWEEP UPPER]
: Set the sweep upper frequency limit
[AMPLITUDE]
: Set the AC amplitude
[INTEGRATION]
: Set the integration count or time.
Up/down/left/right keys : Move the cursor and change numerical values
Modifying knob : Select menus, change parameters, and move markers, etc.
SCREEN COPY
key : Print an image of the LCD screen
LOCAL
key : Return the instrument to local control state
(Oscillator control keys)
AC/DC OFF
key : Turn AC and DC outputs both off
AC OFF
key : Turn only the AC output off
AC/DC ON
key : Turn the AC and DC outputs both on
AC
lamp : Lit during AC output
DC
lamp : Lit during DC output
(Measurement control keys)
DOWN
key : Start downsweep measurement
SPOT
key : Start spot measurement
UP
key : Start upsweep measurement
STOP
key : Stop measurement
REPEAT
key : Toggle between single measurement and repeat measurement
REPEAT
lamp : Lit while in repeat measurement mode