NF FRA51602, Инструкция по эксплуатации

Страница: 260 / 286

9.5 Display section
9
-
14
FRA 51602
9.5 Display section

Display unit 8.4-inch color TFT-LCD (SVGA) with touch screen

Graph display styles
SINGLE One graph is displayed on the screen.
SPLIT Two graphs are displayed on the screen, one above the other.

Graph axis setting The X, Y1, and Y2 axes can each be set to Lin, Log individually.

Data traces Reference data trace (REF) or measurement data trace (MEAS)

Auto scaling On or off
This function automatically optimizes the graph display scale.

Marker display
Main marker The main marker is displayed on the data, and the data value at the position
specified by the marker is displayed.
Delta marker The delta marker and the main marker are displayed on the data, and the
difference between the data values indicated by the two markers is displayed.

Marker search function
Search items
Max, Min Search for the maximum and minimum values
Peak, Bottom Search for the peak (maximal) and the bottom (minimal) values
NextPeak Search for the next peak
NextBottom Search for the next bottom
Value Search for the marker value
⊿
Value Search for the difference between the delta marker and the main marker values
XValue Search for frequency
It is possible to automatically perform a search at the end of a sweep measurement.

Display of the measurement conditions for the measured data
The main measurement conditions for when the data that is being displayed was measured are displayed.

Title display It is possible to specify titles for the measurement data and reference data.
9.6 Memory

Measurement data (MEAS) The data from the sweep measurement
Up to 20 sets of data can be stored in internal memory.

Reference data (REF) Data that can be displayed on a graph together with the measurement data
(MEAS). This can be measurement data or data loaded from a USB memory
device. The display can be turned on or off.

Error correction data Data that is used for equalizing

Measurement conditions 20 sets
Except for data that is not stored in internal memory, measurement data is retained, even if the power is
turned off.