NF FRA51602 Скачать руководство пользователя страница 70

Страница: 70 / 286

3.3 Outline of operation screen

FRA 51602

3.3.2 Outline of graph display

■ Graph axes

The graphs used to display measurement data on this instrument have three axes: X, Y1, and Y2. The

graphs also have two display layout styles (SINGLE and SPLIT). The display style can be set using the

[Graph]

–

[STYLE]

menu.

SINGLE display

SPLIT display

Figure 3-15

Graph display styles

In the SINGLE display style, Y1 is the left vertical axis and Y2 is the right vertical axis. In the SPLIT

style, two graphs are displayed, one above the other, with Y1 as the left vertical axis of the upper graph

and Y2 as the left vertical axis of the lower graph. The X axis is the same for both graphs.

■ Types of display data

The two types of data that are displayed in graph form are measurement data (MEAS DATA) and

reference data (REF DATA). The result of sweep measurements are MEAS DATA. MEAS DATA traces

are updated during sweep measurement operation. The reference data can be updated by copying

measurement data with a menu operation.

The MEAS DATA and REF DATA traces can be individually set to be displayed or to be hidden in the

graph.

■ Markers

Two types of markers are used to specify the range for reading X, Y1, and Y2 values of the data trace in a

graph: main markers and delta markers. The delta marker is used for reading X, Y1, and Y2 axis

difference values relative to the main marker. The value is displayed in the marker display area in the

upper part of the LCD screen.

The main marker is displayed on the graph as "*" and the delta marker is displayed as "

⊿

". The data that

is referenced by the markers can be set to measurement data (MEAS DATA) and reference data (REF

DATA) by using the

ACTIVE

and

⊿

SET

keys.

X axis

Содержание FRA51602































































































































































































































































































Результаты поиска

Содержание FRA51602

Отзывы:

Похожие инструкции для FRA51602

Бренды по названию

Популярные бренды

NF FRA51602, Инструкция по эксплуатации

Результаты поиска

Содержание FRA51602

Отзывы:

Похожие инструкции для FRA51602

Бренды по названию

Популярные бренды