NF FRA51602, Инструкция по эксплуатации

Страница: 170 / 286

5.5 Graph display
5
-
14
FRA 51602
5.5.4 Trace operation
The graphing function of this instrument can display two types of traces, MEAS TRACE and REF TRACE.
Each trace can have Y1 data and Y2 data, which can each be set individually to be displayed or not
displayed. Data that is obtained by measurement is stored in MEAS TRACE data and that data is
overwritten each time a measurement is performed. REF TRACE data, on the other hand, is retained unless
explicitly removed or changed. With reference data displayed in REF TRACE, measurement data can also
be plotted at the same time for comparison.
■ Copying MEAS TRACE to REF TRACE
To copy the measurement data (MEAS TRACE) to REF TRACE, select
【
Trace
】 –
[MEAS COPY] , and
tap on the
[REF TRACE]
function key. The copy completed message will be displayed for a short time.
The copying can also be accomplished by selecting [MEAS COPY] , pressing the ENTER key, selecting
[REF TRACE] from the list box that is displayed, and then pressing the ENTER key again.
2) Tap
1) Select MEAS COPY