NF FRA51602, Инструкция по эксплуатации

Страница: 235 / 286

8.2 Daily maintenance
8-3
FRA 51602
8.2 Daily maintenance
Before use, install this instrument in a location that satisfies the installation conditions. For information on
the installation conditions, refer to "
2.2.2 Installation environment
".
The front panel of this instrument is made of a plastic material. Take care not to damage it with anything
that is sharp or hot.
Wipe the panel or case with a soft cloth to clean it as necessary. To remove stubborn soiling, wipe with a
cloth that has been dampened with a mild detergent solution and squeezed well to remove excess liquid. Do
not use organic solvents such as paint thinner or benzene, or a chemically-treated cloth. Doing so may
result in degradation, a cloudy appearance, or peeling of paint.
If the surface of the LCD touch panel become soiled, wipe it off with absorbent cotton or a soft cloth.
Using detergents or organic solvents may result in degradation or a cloudy appearance and should be
avoided.
8.3 Storage, repacking, and transportation
This instrument should be stored in a location that satisfies the storage conditions. For information on
storage conditions, refer to " 2.2.2 Installation environment ".
When packing the instrument for transportation, etc., use a box that is sufficiently strong and large enough
to provide a surplus of space. Fill the box with packing material that can withstand the weight of the
equipment so that the instrument is fully protected.
Make sure that the package is handled with care to avoid strong shocks during transport.
8.4 Checking the version number
Because the product continues to be improved, instruments may have the same model name but may
different firmware versions. Instruments that have different firmware versions may differ in operation.
When a problem arises, be sure to include the version number with the description of the problem.
We may guide you to update the instrument firmware on the NF Corporation website.
You can check the version after startup in the following way.
From the menus, select
【
Other
】 – 【
SYSTEM
】
to check the firmware version. The number to the right of
"
VERSION
" is the version number.