NF FRA51602, Инструкция по эксплуатации

Страница: 256 / 286

9.4 Analysis processing section
9
-
10
FRA 51602
Dynamic accuracy Upper: gain (ratio); Lower: phase
Measurement
range (rms)
Frequency
Measurement
range (rms)
≦
100 kHz
≦
200 kHz
≦
1 MHz
≦
2 MHz
600 V
－ － －
600 V
300 V
±0.1 dB
±0.6°
－ －
300 V
100 V
－ －
100 V
30 V
:
300 mV
±0.2 dB
±1.2°
30 V
:
300 mV
100 mV 100 mV
Conditions: At least 30 cycles of integration, fixed measurement range for both channels, and
both channels have the same measurement range. Gain and phase variation for when
the signal level changes from full-scale of measurement range to 1/10. The input
signal level is 1:1 or 1:0.1 between channels.
*For the cells that contain only " – ", the measurement range exceeds the maximum input voltage (see
" 9.2 Analysis input section , ● Maximum input voltage"), so either the measurement is not possible
or there is no accuracy specification for it.