NF FRA51602, Инструкция по эксплуатации

Страница: 109 / 286

3.5 Operation screen reference
3
-
71
FRA 51602
■ [WEIGHTING FACTOR]
– [CH1] : Set the CH1 weight factor.
■ [WEIGHTING FACTOR]
– [CH2] : Set the CH2 weight factor.
This value serves as a multiplier for the measurement result. It can be used as a simple correction factor
for when a probe, amplifier, or shunt resistance is connected to the circuit being measured.
○ Setting method
< Numerical value settings (immediate setting) > , < Numerical value settings (new input) > ,
< Numerical value settings (edit) >
○ Function key functions
• [DIRECT NEW]
: Set the maximum or minimum X axis value with the numerical input
dialog
【
NUM
】
.
• [DIRECT EDIT]
: Edit the maximum or minimum X axis value with the numerical input
dialog
【
NUM
】
.
○ Functions of the function keys set with the numerical input dialog
【
NUM
】
• [u(10
– 6
)] : Set with the entered value in units of 10
– 6
.
• [m(10
– 3
)] : Set with the entered value in units of 10
– 3
.
• [×1]
: Set with the entered value.
• [k(10
3
)] : Set with the entered value in units of 10
3
.
• [M(10
6
)] : Set with the entered value in units of 10
6
.
• [p(10
– 12
)] : Set with the entered value in units of 10
– 12
.
• [n(10
– 9
)] : Set with the entered value in units of 10
– 9
.
• [G(10
9
)] : Set with the entered value in units of 10
9
.
• [T(10
12
)]
: Set with the entered value in units of 10
12
.
The setting range is 0.0 to 1.0 T (10
12
) and the resolution is 6 digits or 1 p(10
– 12
), whichever is larger.
■ [WEIGHTING FACTOR]
–
[INVERT]
: Set phase inversion.
This inverts the phase of the measurement results.
○ Setting method
< List operations (confirming) >
• ON
: Display the measurement results with phase inversion.
• OFF
: Do not invert phase.
For more information, refer to "
5.9.2 Input weighting
".